Free Delivery over £500
Sika Everbuild Translucent Silicone Sealant – 380cc
Everbuild Tecnic® Silicone 996 is a low modulus, neutral cure silicone sealant which is suitable for use on glazing and most building and constructions joints, both porous and non-porous.
For maximum movement accommodation, it is recommended that:
1/ The sealant joint width should be no less than 5mm
2/ Joint depth should be half width e.g. 30mm wide and 15mm deep
Everbuild Tecnic® Silicone 996 does not require a primer on most common surfaces, although adhesion tests are recommended prior to full scale application. If the joint is likely to be immersed or if adhesion is poor (especially on porous surfaces) use EVERBUILD SILICONE PRIMER P1. To improve adhesion (if required) to non-porous surfaces, prime with EVERBUILD SILICONE PRIMER NP2.
Surfaces must be clean, dry and free from dust, grease and other contaminants. Remove dust with compressed air. Degrease by using a solvent soaked pad, followed by wiping with a clean cloth. Following cleaning procedure and materials are recommended:
|Alu SunDry Items||
Translucent – 996
Alumasc’s leading Drainage Calculator allows Architects, Specifiers and Building Engineer’s to design and quantify all their Rainwater Drainage requirements using this dedicated software.
Note: The Alumasc range of calculation tools on the Drainage software are based on BS EN 12056 and it is your responsibility to ensure that the data has been correctly interpreted. Architects, Engineers and other users of this software must satisfy themselves in respect of the adequacy of the design. For complicated calculations, please contact the Alumasc Rainwater or Drainage technical team on 01536 383810 or firstname.lastname@example.org who may be able to assist.